![]() Only during gcode load to the OrangePi CPU sits at 100% and it might take several seconds to load the file. During printing, CPU usually sits at around 5% and RAM – at 25-30% of usage. ![]() Also, the OrangePi Zero is smaller and has just enough I/O for this use case: one USB (as only one is needed to connect to the printer), one LAN connector, and some I/O pins for external buttons (will be used to power-off/reboot the system).įurthermore, the Orange Pi Zero has a quad core CPU running at 1GHz and 512MB of RAM which is plenty, if basic WEB interface is going to be used and might not be enough if a WEB Cam streaming (or other RAM and CPU intensive features) will be used for viewing the printing process in real time. ![]() I have chosen OctoPrint on an OrangePi instead of a Raspberry Pi (3B version), because I had issues with a power supplies – it is quite hard to get a good PSU suitable for RPi and OrangePi Zero seemed to work a lot better even with cheapest USB Chargers.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |